Tags | Dieser Datensatz ist Bestandteil der ÖKOBAUDAT. |
Kerninformationen des Datensatzes | |||
Ort | DE | ||
Referenzjahr | 2022 | ||
Name |
| ||
Anwendungshinweis für Datensatz | Scope: This document refers to sanded and unsanded OSB manufactured in the following plant of the Sonae Arauco group: Sonae Arauco Deutschland GmbH Strohmweg 1 D-38489 Nettgau Germany The production volume of this plant covers 100 % of the total production of OSB by Sonae Arauco group. System boundary: Type of the EPD: cradle-to-gate with modules C1 to C4 and module D (A1-A3, C and D) Modules A1 – A3 of the production stage cover the manufacturing of the products, including raw material extraction and processing, energy generation, the production of ancillary products and packaging materials, transport, as well as all waste treatment processes. Eventual benefits of recycling or energy recovery are neglected. The resource aspects of wood were inventoried via material inherent properties such as resource extraction of CO2 from the atmosphere and the lower heating value as the use of renewable energy. Material inherent properties are subject to co-product allocation as ruled in EN 15804. Module A4 covers the transport of the product from the production site to the construction site by a lorry over a default distance of 460 km. Module A5 covers the transport of the packaging material from the construction site and its disposal. Default end-of-waste states for the packaging materials from the packed products at the construction site are defined in analogy for wastes occurring in modules A1-A3. Eventual further inputs for the installation of the products are not considered due to the broad applicability of the assessed products. The substituted primary material from the net amount of recycled material and from recovered energy exported from the product system in Module A5 is declared in Module D. Module C1 manual deconstruction is assumed. The declared values are thus 0. Module C2 includes the transport of the de-constructed product to a recycling centre by over 50 km. Module C3 covers the preparation of the post-consumer board to become a secondary fuel; the end-of-waste status for recycled wood-based boards is defined as the point where they have been sorted and chipped, ready to be used as secondary fuels. In line with EN 16485, the export of the biogenic carbon stored in the board, expressed in CO2-equivalent is also reported in module C3. Module C4 is not relevant for the assumed end-of-life scenario. The declared values are thus 0. Module D compiles all the benefits and burdens associated with the secondary fuels, secondary materials and exported energy leaving the production system in the modules A5 and C3. Therefore, module D covers the avoided burdens from recycling and from energy recovered from the waste treatment in module A5 as well as the transport of the obsolete boards to a biomass combustion plant, the combustion process itself and the loads and benefits of the substitution of fossil fuels and/or electricity. Substitution effects in module D are always calculated for the net amount of secondary material or secondary fuel of the product system in line with EN 16485. | ||
Technisches Anwendungsgebiet | AGEPAN® OSB ECOBOARD und OSB ECOBOARD haben eine hohe Tragfähigkeit und sind formstabil. Sie können sowohl für konstruktive als auch für dekorative Zwecke verwendet werden. Voraussetzung für den konstruktiven Einsatz sind die Leistungsmerkmale der EN 13986 und das CE-Zeichen. Einsatzgebiete sind unter anderem: tragende und aussteifende Wand- und Deckenverkleidungen, Bodeninstallationen und Installationsplatten, Laden- und Messebau sowie Verpackungs- und Möbelelemente. Die verschiedenen von Sonae Arauco hergestellten OSB-Qualitäten sind nach EN 300 mit den Nummern 2 bis 4 versehen. Die folgenden Klassifizierungen gelten für verschiedene Anwendungen: - OSB/2: Platten für die tragende Verwendung im Trockenen - OSB/3: Platten für tragende Zwecke unter feuchten Bedingungen - OSB/4: Platten für hochbeanspruchte, tragende Zwecke zur Verwendung unter feuchten Bedingungen | ||
Gliederungsnummer | 3.2.04 | ||
Klassifizierung |
Klassenname
:
Hierarchieebene
| ||
Allgemeine Anmerkungen zum Datensatz | AGEPAN® OSB ECOBOARD and OSB ECOBOARD (Oriented Strand Board) are wood materials comprising large longitudinal wood shavings ("strands") which are glued with formaldehyde-free glue, using a synthetic resin binding agent (pMDI). The strands are aligned in a process-controlled manner (oriented) and compressed in a continuous process (ContiRoll technology) in three layers, ranging in thickness from 6 to 40 mm. The upper and lower layers are longitudinal while the middle layer runs transversally to the panel direction. Both AGEPAN® OSB ECOBOARD and OSB ECOBOARD focus on construction, as part of Sonae Arauco solutions for this application. | ||
Copyright | Ja | ||
Eigentümer des Datensatzes | |||
Quantitative Referenz | |||
Referenzfluss(flüsse) |
| ||
Zeitliche Repräsentativität | |||
Datensatz gültig bis | 2027 | ||
Technologische Repräsentativität | |||
Technische Beschreibung inklusive der Hintergrundsysteme | Die Herstellung von OSB umfasst die folgenden Schritte: 1. Entrindung der Stämme 2. Zerspanen des Holzes im Messerringzerspaner 3. Trocknen 4. Sichtung in Ober- und Mittelschichtfraktionen 5. Zwischenlagerung in Dosierbunkern 6. Gewichtsbestimmung der Stränge mit Waage 7. Getrennte Beleimung der Ober- und Mittelschichtstränge 8. Einstreuen der OSB-Matte (Ausrichten der Litzen) 9. Verpressen der OSB-Matte unter hohem Druck in einer kontinuierlichen Heißpresse 10. Kühlen der Rohplatten in Sternkühlern 11. Stapeln 12. Optional: Schleifen der Ober- und Unterseite 13. Wahlweise: Aufteilung in feste Formate oder Nut- und Federplatten Nachstehend finden Sie ein Prozessdiagramm. Die Produktionsstätte ist nach den folgenden Normen zertifiziert: EN ISO 9001:2015; OHSAS 18001:2007 / ISO 45001:2018; EN ISO 50001:2018. Darüber hinaus umfasst das gesamte Sortiment CE-gekennzeichnete Produkte, und PEFCTM- und FSC®-zertifizierte Produkte können auf Anfrage zur Verfügung gestellt werden. |
Subtyp | specific dataset | ||||
LCA-Methoden-Bericht | |||||
Datenquellen, Behandlung und Repräsentativität | |||||
Dokumentation des Datenqualitätsmanagements | |||||
Für diesen Datensatz verwendete Datenquelle(n) | |||||
Vollständigkeit | |||||
Validierung | |||||
| |||||
Konformitätsdeklarationen |
Konformität |
Konformitätsystemname
|
Genehmigung der insgesamten Einhaltung
|
Nomenclature compliance
|
Methodological compliance
|
Bewertung der Einhaltung
|
Dokumentation der Einhaltung
|
Einhaltung der Qualitätsvorgaben
|
Konformität |
Konformitätsystemname
|
Genehmigung der insgesamten Einhaltung
|
Nomenclature compliance
|
Methodological compliance
|
Bewertung der Einhaltung
|
Dokumentation der Einhaltung
|
Einhaltung der Qualitätsvorgaben
|
Auftraggeber und Ziel | |
Auftraggeber | |
Datengenerator | |
Ersteller/Modellierer | |
Dateneingabe | |
Zeitstempel (zuletzt gespeichert) | 2022-09-06T11:44:36.872 |
Datensatzformat(e) | |
Veröffentlichung und Eigentum | |
UUID | 881736f8-1bb1-4e9f-852a-cc9a1f676343 |
Datensatzversion | 00.01.000 |
Registrierungsstelle | |
Registrierungsnummer | EPD-SON-20220209-ICC1-EN |
Eigentümer des Datensatzes | |
Copyright | Ja |
Lizenztyp | Free of charge for all users and uses |
Zugriffs- und Nutzungseinschränkungen | None |
Parameter zur Beschreibung des Ressourceneinsatzes und sonstige Umweltinformationen